Lesson 1

Post Reply
admin
Site Admin
Posts: 3174
Joined: Wed Dec 11, 2019 8:31 am
Has thanked: 4 times

Lesson 1

Post by admin »

raspberry-logo.png
raspberry-logo.png (2.91 KiB) Viewed 4111 times
The goal of these threads is to teach students English and Raspberry Pi, ESP32 Programming by posting short tasks and solutions.
To run and compile programs you should use IDE.
Install Python
https://www.python.org/downloads/
Download the next archives
https://easy-english-study.com/raspberryemulator.zip
https://easy-english-study.com/esp32sim ... 0Setup.zip
Unpack these archives.
Open esp32simulator-1.0.0Setup.exe and install the program.
Your Windows OS may warn you that this file is dangerous, ignore warning and click More … => Install anyway option!
Create a folder to save ESP32 projects (it can be Local disk C\esp32projects).
Download and install the program Lightshot to make screenshots
https://app.prntscr.com/
admin
Site Admin
Posts: 3174
Joined: Wed Dec 11, 2019 8:31 am
Has thanked: 4 times

Re: Lesson 1

Post by admin »

Create the file "blinky.py" inside the folder "raspberryemulator" and copy-paste the next code (you may click the button Select Al and press Ctrl+С (to copy the code from the forum) and Ctrl+V (to paste the code))

Code: Select all

from EmulatorGUI import GPIO
#import RPi.GPIO as GPIO
import time
import traceback

GPIO.setmode(GPIO.BCM) #configures Raspberry Pi to use BCM (Broadcom) pin names

led_pin = 4 #creates a new variable led_pin:=4
GPIO.setup(led_pin, GPIO.OUT) #makes GPIO4 an output
try:
    while(True):
        GPIO.output(led_pin,True) #LED on
        time.sleep(2) #delay 2 seconds
        GPIO.output(led_pin, False) #LED off
        time.sleep(2)
finally:
    print("Cleaning up")
    GPIO.cleanup() #this ensures a clean exit
Save this file as "blinky.py".
In File Explorer, click the address bar to select it (or press Alt+D). Type "cmd.exe" into the address bar and hit Enter to open the Command Prompt with the path of the current folder already set.
cmd1.png
cmd1.png (3.52 KiB) Viewed 4121 times
Run the next command in cmd

Code: Select all

python blinky.py
You should see GPIO4 blinking.
raspberry-blinky.png
raspberry-blinky.png (9.59 KiB) Viewed 4120 times
GPIO.setmode(GPIO.BCM) tells RPi.GPIO that we want to use the names of the pins rather than their position.
The “cleanup” function sets all the GPIO pins back to a harmless input state, reducing the chance of damaging the Pi if one of the pins set to be an output should accidentally short to a power pin or other output
admin
Site Admin
Posts: 3174
Joined: Wed Dec 11, 2019 8:31 am
Has thanked: 4 times

Re: Lesson 1

Post by admin »

Open esp32simulator.
Create the folder "blinky" in the directory "esp32projects". Create "main.py", "diagram.json" inside the folder "blinky".

Connect all components with wires in the same way, as in the picture. You can rotate a component by pressing Ctrl+R. The resistor must be connect to D15. Pay attention to LED, since it emits light only if it's connected correctly. The current must go from an anode to a cathode (LED will not emit light if you connect it in the opposite direction).
blinky.png
blinky.png (40.55 KiB) Viewed 4104 times
Paste the next code to main.py (you may click the button Select Al and press Ctrl+С (to copy the code from the forum) and Ctrl+V (to paste the code)).

Code: Select all

from machine import Pin
from utime import sleep

led = Pin(15, Pin.OUT) #makes Pin 15 an output
while True:
  led.on() #turns on LED
  sleep(2) #time delay 2 seconds
  led.off() #turns off LED
  sleep(2)

Click the green button to run the project.
You should see a blinking LED.
Save your project to the local folder "blinky". Copy-paste the code from the files "main.py", "diagram.json" in the simulator to your local files. Make a screenshot of the circuit and save the screenshot to the folder "blinky".
Whenever you want to continue programming you can copy-paste the code from the local files to your simulator (Note. The circuit is stored in the file "diagram.json", you don't need to make a new circuit all the time).
Post Reply